second semester CURRICULUM AND SYLLABI UNDER REGULATIONS 2008 FOR AFFILIATED INSTITUTIONS

ANNA UNIVERSITY TIRUNELVELI

CURRICULUM AND SYLLABI 

UNDER REGULATIONS 2008 FOR AFFILIATED INSTITUTIONS 

(with effect from the academic year 2008 – 2009)

 (Common to all B.E. / B.Tech. Degree Programmes

except B.E. – Marine Engineering)

SEMESTER II

CURRICULUM 

SL. No.	COURSE CODE	COURSE TITLE	L	T	P	M
THEORY
1.	HS21	Technical English – II*	3	0	0	100
2.	MA22	Mathematics – II*	3	1	0	100
3.	PH23	Engineering Physics – II*	3	0	0	100
4.	CY24	Engineering Chemistry – II*	3	0	0	100
5. a   5. b  5. c	ME25 EE25 EC25	Engineering Mechanics   (For non-circuit branches) Circuit Theory   (For branches under Electrical Faculty)  Electric Circuits and Electron Devices (For branches under I & C Faculty)	3 3 3	1 1 1	0 0 0	100 100 100
6. a   6. b	EE26 ME26	Basic Electrical & Electronics Engineering   (For non-circuit branches) Basic Civil & Mechanical Engineering   (For circuit branches)	4 4	0 0	0 0	100 100
PRACTICAL
7.	GE27	Computer Practice Laboratory-II*	0	1	2	100
8.	GS28	Physics & Chemistry Laboratory - II*	0	0	3	100
9. a	ME29	Computer Aided Drafting and Modeling Laboratory   (For non-circuits branches)	0	1	2	100
9. b     9. c	EE29 EC29	Electrical Circuits Laboratory (For branches under Electrical Faculty) Circuits and Devices Laboratory   (For branches under I & C Faculty)	0 0	0 0	3 3	100 100
10.	HS210	English Language Skill Laboratory (Skill of Listening)	0	0	3	100
TOTAL : 33 PERIODS

*   Common to all B.E. / B.Tech. Programmes 

A. CIRCUIT BRANCHES

I           Faculty of Electrical Engineering

1. B.E. Electrical and Electronics Engineering

2. B.E. Electronics and Instrumentation Engineering

3. B.E. Instrumentation and Control Engineering

II          Faculty of Information and Communication Engineering

1. B.E. Computer Science and Engineering

2. B.E. Electronics and Communication Engineering

3. B.E. Bio Medical Engineering

4. B.Tech. Information Technology

B. NON – CIRCUIT BRANCHES

 I          Faculty of Civil Engineering

1. B.E. Civil Engineering

II          Faculty of Mechanical Engineering

1. B.E. Aeronautical Engineering 

2. B.E. Automobile Engineering

3. B.E. Marine Engineering

4. B.E. Mechanical Engineering

III         Faculty of Technology

1. B.Tech. Biotechnology

2. B.Tech. Polymer Technology 

B.E. MARINE ENGINEERING

(To be followed from the Academic year 2008 – 2009 onwards)

SEMESTER – II

SL. No.		COURSES CODE	COURSE TITLE	L	T	P	M
THEORY
1.		HS 21	Technical English – II*	3	0	0	100
2.		MA 22	Mathematics –II*	3	1	0	100
3.		PH 23	Engineering Physics – II*	3	0	0	100
4.		MR 24	Marine Engineering Thermodynamics	4	0	0	100
5.		ME 25	Engineering Mechanics*	3	1	0	100
6.		EE 26	Basic Electrical and Electronics Engineering*	4	0	0	100
PRACTICAL
7.		GE 27	Computer Practices Lab –II*	0	1	2	100
8.		GS 28	Physics & Chemistry Lab II*	0	0	3	100
9.		ME 29	Computer Aided Drafting & Modeling Lab*	0	1	2	100
10.		HS 210	English Language Skill Laboratory (Skill of Listening)*	0	0	3	100
11.		MR 211	Workshop Fitting**	0	0	3	100
	TOTAL : 37 PERIODS

 *  The Syllabus is common as of B.E. / B.Tech.

** This course and syllabi are prescribed as per the directions of the Director General of Shipping. Govt. of India

       

1.         HS21                           TECHNICAL ENGLISH II                          3   0   0   100 

   

 

AIM

To encourage students to actively involve in participa0tive learning of English and to help them acquire communication skills.

OBJECTIVES

1. To help students develop listening skills for academic and professional purposes
2. To help students acquire the ability to speak effectively in English in real-life situations
3. To inculcate reading habit and to develop effective reading skills
4. To help students improve their active and passive vocabulary
5. To familiarize students with different rhetorical functions of scientific English
6. To enable students write letters and reports effectively in formal and business situations

UNIT I

Technical Vocabulary – meanings in context, sequencing words, Articles – Prepositions, intensive reading and predicting content, Reading and interpretation, extended definitions, process description

Suggested activities

1. Exercises on word formation using the prefix `self’ – Gap filling with preposition Exercises – Using sequence words
2. Reading comprehension exercise with questions based on inference – Reading heading and predicting the content – reading advertisements and interpretation
3. Writing extended definitions – Writing description of processes – Writing paragraphs based on discussions – Writing paragraphs describing the future

UNIT II

Phrases / structure indicating cause/purpose – Adverbs – Skimming – Non-verbal communication – Listening - correcting verbal and non-verbal communication – speaking in group discussion – Formal Letter writing – Writing analytical paragraphs.

Suggested Activities

1. Reading comprehension exercises with questions on overall content – Discussions analyzing stylistic features (creative and factual description) – Reading comprehension exercises with texts including graphic communication – Exercises in interpreting non-verbal communication.
2. Listening comprehension exercises to categories data in tables.
3. Writing formal letters - quotations, placing orders, clarification, and complaint , Letter seeking permission for industrial visits , writing analytical paragraphs on different debatable issues.

UNIT III

Cause and effect expressions – Different grammatical forms of the same word – speaking – stress and intonation, Group Discussions – reading – critical reading – listening – writing – using connectives, repot writing – types, structure, data collection, content, form, recommendations.

Suggested Activities

1. Exercises combining sentences using cause and effect expressions – Gap filling exercises using the appropriate tense forms – Making sentences using different grammatical forms of the same word.
2. Speaking exercises involving the use of stress and intonation - Group discussions – analysis of problems and offering solutions.
3. Reading comprehension exercises with critical questions, multiple choice questions.
4. Sequencing of jumbled sentences using connectives – Writing different types of reports like industrial accident report and survey report – writing recommendations.

UNIT IV

Numerical adjectives – Oral instructions – Descriptive writing – Argumentative paragraphs – Letter of application – content, format (CV/Bio-data) – instructions, imperative forms – checklists, Yes/No question form – Email communication

Suggested Activities

1. Rewriting exercises using numerical adjectives
2. Reading comprehension exercises with analytical questions on content – Evaluation of content
3. Listening comprehension – entering information in tabular form, intensive listening exercise and completing the steps of a process.
4. Speaking – Role Play – group discussions – Activities giving oral instructions
5. Writing descriptions, expanding hints – writing argumentative paragraphs – writing formal letters – writing letter of application with CV/Bio-data – Writing general and safety instructions – Preparing checklists – Writing e-mail messages

UNIT V

Speaking – Discussion of problems and solutions – Creative and critical thinking – writing an essay, Writing a proposal.

Suggested Activities

1. Case Studies on problems and solutions
2. Brain storming and discussion
3. Writing Critical essays
4. Writing short proposals of 2 pages for starting a project, solving problems, etc.
5. Writing advertisements

TOTAL 45 periods

AREAS TO BE COVERED UNDER DIFFERENT HEADINGS

A. Language Focus

1. Technical vocabulary
2. Sequencing words
3. Articles
4. Prepositions
5. Word formation using prefixes
6. Phrases / Structure indicating purpose
7. Adverbs
8. Cause and effect expressions
9. Tense forms
10. Different grammatical forms of the same word
11. Numerical adjectives
12. Extended definitions

B. Reading

1. Intensive reading and predicting content
2. Reading and interpretation
3. Skimming
4. Critical reading
5. Reading comprehension exercises

C. Listening

1. Correlating verbal and non-verbal communication
2. Listening comprehension

D. Speaking

1. Group Discussions
2. Stress and intonation
3. Role plays and giving oral instructions
4. Discussion of problems and solutions

E. Writing

1. Process description
2. Formal letter writing
3. Writing analytical paragraphs
4. Report Writing
5. Descriptive writing
6. Argumentative paragraphs
7. Letter of application
8. Instructions
9. Recommendations
10. Checklists
11. Email Communication
12. Writing critical essays
13. Writing proposals

TEXT BOOK:

1.    ‘English for Engineers and Technologists’ Combined Edition (Volumes 1 & 2), Department of Humanities & Social Sciences, Anna University, Chennai: Orient Longman Pvt. Ltd., 2006. Themes 5 – 8 (Technology, Communication, Environment, Industry)

REFERENCES:

1.    P. K. Dutt, G. Rajeevan and C.L.N Prakash, ‘A Course in Communication      Skills’, Cambridge University Press, India 2007. 

2.    Krishna Mohan and Meera Banerjee, ‘Developing Communication Skills’,      Macmillan India Ltd., (Reprinted 1994 – 2007).

3.    Edgar Thorpe, Showick Thorpe, ‘Objective English’, Second Edition,      Pearson Education, 2007. 

Extensive Reading: 

1. Robin Sharma, ‘The Monk Who Sold His Ferrari’, Jaico Publishing House, 2007

Note: 

The book listed under Extensive Reading is meant for inculcating the reading habit of the students. They need not be used for testing purposes.

Question Paper Pattern

For the Semester Examination the following pattern will be adopted

Semester II Technical English II

Scheme of Examination

PART A

Questions 1-10

Number of short answers questions to be set 10

Distribution of Marks : 10 x 2 = 20 marks (each question carrying 2 marks)

Format : Answer all questions type any ten language focus items given in Unit entitled “Language Focus”

Part B

Five Questions with subdivisions

Distribution of Marks : 5 x 16 = 80 marks (each division carrying 16 marks)

Question No. 11 (No choice) Four general Reading Comprehension passages each with different types of questions – true or false type, short answer questions, multiple choice items, fill in blank types, cloze types, sentence completion questions and meaning of words.  4 x 4 = 16 marks

Question No. 12

a. Business Letter Writing (either…..or …..type)                                                 8 marks

b. Job Application Letter ( no choice)                                                                    8 marks

Question No. 13

a.         Writing recommendations / checklist ( either……or……. type)             8 marks

b.         Writing paragraph (descriptive / processing / analytical) ( either……or……. type)                                                                                                                                                  8 marks

Question No. 14

a.         Writing reports (either……….or......type)                                                  8 marks

b.         Writing different types of reports (either…..or type)                               8 marks

Question No. 15                                                                                                   16

a) General Essay                                                                                        

(Or)

b) General Essay                                                                                        

2.         MA22                          MATHEMATICS – II                                     3  1  0  100

UNIT I             ORDINARY DIFFERENTIAL EQUATIONS                                      12

Higher order linear differential equations with constant coefficients – Method of variation of parameters – Cauchy’s and Legendre’s linear equations – Simultaneous first order linear equations with constant coefficients.

UNIT II            VECTOR CALCULUS                                                                                    12

Gradient Divergence and Curl – Directional derivative – Irrotational and solenoidal vector fields – Vector integration – Green’s theorem in a plane, Gauss divergence theorem and stokes’ theorem (excluding proofs) – Simple applications involving cubes and rectangular parallelpipeds.

UNIT III           ANALYTIC FUNCTIONS                                                                    12

Functions of a complex variable – Analytic functions – Necessary conditions, Cauchy – Riemann equation and Sufficient conditions (excluding proofs) – Harmonic and orthogonal properties of analytic function – Harmonic conjugate – Construction of analytic functions – Conformal mapping : w= z+c, cz, 1/z, and bilinear transformation.

UNIT IV           COMPLEX INTEGRATION                                                                12 

Complex integration – Statement and applications of Cauchy’s integral theorem and Cauchy’s integral formula – Taylor and Laurent expansions – Singular points – Residues – Residue theorem – Application of residue theorem to evaluate real integrals – Unit circle and semi-circular contour(excluding poles on boundaries).

UNIT V            LAPLACE TRANSFORM                                                                   12

Laplace transform – Conditions for existence – Transform of elementary functions – Basic properties – Transform of derivatives and integrals – Transform of unit step function and impulse functions – Transform of periodic functions. 

Definition of Inverse Laplace transform as contour integral – Convolution theorem (excluding proof) – Initial and Final value theorems – Solution of linear ODE of second order with constant coefficients using Laplace transformation techniques.

TOTAL : 60 PERIODS

TEXT BOOK:

1.   Bali N. P and Manish Goyal, “Text book of Engineering Mathematics”, 3^rd Edition, Laxmi Publications (p) Ltd., (2008).

2.   Grewal. B.S, “Higher Engineering Mathematics”, 40^th Edition, Khanna Publications, Delhi, (2007).

REFERENCES:

1.    Ramana B.V, “Higher Engineering Mathematics”,Tata McGraw Hill Publishing Company, New Delhi, (2007).

2.    Glyn James, “Advanced Engineering Mathematics”, 3^rd Edition, Pearson Education, (2007).

3.    Erwin Kreyszig, “Advanced Engineering Mathematics”, 7^th Edition, Wiley India, (2007).

4.    Jain R.K and Iyengar S.R.K, “Advanced Engineering Mathematics”, 3^rd Edition, Narosa Publishing House Pvt. Ltd., (2007).

3.         PH23                           ENGINEERING PHYSICS – II                      3  0  0  100

 

UNIT  I           CONDUCTING MATERIALS                                                                 9 

Conductors – classical free electron theory of metals – Electrical and thermal conductivity – Wiedemann – Franz law – Lorentz number – Draw backs of classical theory – Quantum theory – Fermi distribution function – Effect of temperature on Fermi Function – Density of energy states – carrier concentration in metals.

UNIT  II         SEMICONDUCTING MATERIALS                                                         9

Intrinsic semiconductor – carrier concentration derivation – Fermi level – Variation of Fermi level with temperature – electrical conductivity – band gap determination – extrinsic semiconductors – carrier concentration derivation in n-type and p-type semiconductor – variation of Fermi level with temperature and impurity concentration – compound semiconductors – Hall effect –Determination of Hall coefficient – Applications.

UNIT  III        MAGNETIC AND SUPERCONDUCTING MATERIALS                        9

Origin of magnetic moment – Bohr magneton – Dia and para magnetism – Ferro magnetism – Domain theory – Hysteresis – soft and hard magnetic materials – anti – ferromagnetic materials – Ferrites – applications – magnetic recording and readout – storage of magnetic data – tapes, floppy and magnetic disc drives.

Superconductivity : properties - Types of super conductors – BCS theory of superconductivity(Qualitative) - High Tc superconductors – Applications of superconductors – SQUID, cryotron, magnetic levitation.

UNIT  IV         DIELECTRIC  MATERIALS                                                                  9

Electrical susceptibility – dielectric constant – electronic, ionic, orientational and space charge polarization – frequency and temperature dependence of polarisation – internal field – Claussius – Mosotti relation (derivation) – dielectric loss – dielectric breakdown – uses of dielectric materials (capacitor and transformer) – ferroelectricity and applications.

UNIT  V          MODERN ENGINEERING MATERIALS                                              9

Metallic glasses: preparation, properties and applications.

Shape memory alloys (SMA): Characteristics, properties of NiTi alloy,  application, advantages and disadvantages of SMA

Nanomaterials:  synthesis –plasma arcing – chemical vapour deposition – sol-gels – electrodeposition – ball milling - properties of nanoparticles and applications. 

Carbon nanotubes: fabrication – arc method – pulsed laser deposition – chemical vapour deposition - structure – properties and applications.

 

TOTAL : 45 PERIODS

TEXT BOOKS:

1. Charles Kittel ‘ Introduction to Solid State Physics’, John Wiley & sons,
   7^th edition, Singapore (2007) 
2. Charles P. Poole and  Frank J.Ownen, ’Introduction to Nanotechnology’, Wiley India(2007) (for Unit V)

 REFERENCES:

1.     Rajendran, V, and Marikani A, ‘Materials science’Tata McGraw Hill publications, (2004) New delhi.

2.     Jayakumar, S. ‘Materials science’, R.K. Publishers, Coimbatore, (2008).

3.     Palanisamy P.K, ‘Materials science’, Scitech publications(India) Pvt. LTd., Chennai, second Edition(2007)

4.     M. Arumugam, ‘Materials Science’ Anuradha publications, Kumbakonam, (2006).

4.         CY24               ENGINEERING CHEMISTRY – II                          3   0   0   100 

AIM  

To impart a sound knowledge on the principles of chemistry involving the different application oriented topics required for all engineering branches.

OBJECTIVES

        • The student should be conversant with the principles electrochemistry,    electrochemical cells, emf and applications of emf measurements.

        • Principles of corrosion control

        • Chemistry of Fuels and combustion

        • Industrial importance of Phase rule and alloys

        • Analytical techniques and their importance.

  

UNIT  I            ELECTROCHEMISTRY                                                                       9

Electrochemical cells – reversible and irreversible cells – EMF – measurement of emf – Single electrode potential – Nernst equation (problem) – reference electrodes –Standard Hydrogen electrode -Calomel electrode – Ion selective electrode – glass electrode and measurement of pH – electrochemical series – significance – potentiometer titrations (redox - Fe²⁺ vs dichromate and precipitation – Ag⁺ vs CI^- titrations) and conduct metric titrations (acid-base – HCI vs, NaOH) titrations,

  

UNIT  II           CORROSION AND CORROSION CONTROL                                  9

Chemical corrosion – Pilling – Bedworth rule – electrochemical corrosion – different types – galvanic corrosion – differential aeration corrosion – factors influencing corrosion – corrosion control – sacrificial anode and impressed cathodic current methods – corrosion inhibitors – protective coatings – paints – constituents and functions – metallic coatings – electroplating (Au) and electroless (Ni) plating.

UNIT III           FUELS AND COMBUSTION                                                              9

Calorific value – classification – Coal – proximate and ultimate analysis metallurgical coke – manufacture by Otto-Hoffmann method – Petroleum processing and fractions – cracking – catalytic cracking and methods-knocking – octane number and cetane number – synthetic petrol – Fischer Tropsch and Bergius processes – Gaseous fuels- water gas, producer gas, CNG and LPG, Flue gas analysis – Orsat apparatus – theoretical air for combustion. 

UNIT IV           PHASE RULE AND ALLOYS                                                              9

Statement and explanation of terms involved – one component system – water system – condensed phase rule – construction of phase diagram by thermal analysis – simple eutectic systems (lead-silver system only) – alloys – importance, ferrous alloys – nichrome and stainless steel – heat treatment of steel, non-ferrous alloys – brass and bronze. 

 

UNIT V            ANALYTICAL TECHNIQUES                                                              9

Beer-Lambert’s law (problem) – UV-visible spectroscopy and IR spectroscopy – principles – instrumentation (problem) (block diagram only) – estimation of iron by colorimetry – flame photometry – principle – instrumentation (block diagram only) – estimation of sodium by flame photometry – atomic absorption spectroscopy – principles – instrumentation (block diagram only) – estimation of nickel by atomic absorption spectroscopy.

 TOTAL: 45 PERIODS

 TEXT  BOOKS:

1. P.C.Jain and Monica Jain, “Engineering Chemistry” Dhanpat Rai Pub, Co., New Delhi (2002).
2. S.S.Dara “A text book of Engineering Chemistry” S.Chand & Co.Ltd., New Delhi (2006).

REFERENCES:

1.    B.Sivasankar “Engineering Chemistry” Tata McGraw-Hill Pub.Co.Ltd, New Delhi (2008).

2.    B.K.Sharma “Engineering Chemistry” Krishna Prakasan Media (P) Ltd., Meerut (2001). 

5. a      ME25                          ENGINEERING MECHANICS                     3   1  0  100

OBJECTIVE

At the end of this course the student should be able to understand the vectorial and scalar representation of forces and moments, static equilibrium of particles and rigid bodies both in two dimensions and also in three dimensions. Further, he should understand the principle of work and energy. He should be able to comprehend the effect of friction on equilibrium. He should be able to understand the laws of motion, the kinematics of motion and the interrelationship. He should also be able to write the dynamic equilibrium equation. All these should be achieved both conceptually and through solved examples.

UNIT I             BASICS & STATICS OF PARTICLES                                               12

Introduction – Units and Dimensions – Laws of Mechanics – Lame’s theorem, Parallelogram and triangular Law of forces – Vectors – Vectorial representation of forces and moments – Vector operations: additions, subtraction, dot product, cross product – Coplanar Forces – Resolution and Composition of forces – Equilibrium of a particle – Forces in space – Equilibrium of a particle in space – Equivalent systems of forces – Principle of transmissibility – Single equivalent force.

UNIT II            EQUILIBRIUM OF RIGID BODIES                                                    12

Free body diagram – Types of supports and their reactions – requirements of stable equilibrium – Moments and Couples – Moment of a force about a point and about an axis – Vectorial representation of moments and couples – Scalar components of a moment – Varignon’s theorem – Equilibrium of Rigid bodies in two dimensions – Equilibrium of Rigid bodies in three dimensions – Examples

UNIT III           PROPERTIES OF SURFACES AND SOLIDS                                 12

Determination of Areas and Volumes – First moment of area and the Centroid of sections – Rectangle, circle, triangle from integration – T section, I section, - Angle section, Hollow section by using standard formula – second and product moments of plane area – Rectangle, triangle, circle from integration – T section, I section, Angle section, Hollow section by using standard formula – Parallel axis theorem and perpendicular axis theorem – Polar moment of inertia – Principal moments of inertia of plane areas – Principal axes of inertia – Mass moment of inertia – Derivation of mass moment of inertia for rectangular section, prism, sphere from first principle – Relation to area moments of inertia.

UNIT IV           DYNAMICS OF PARTICLES                                                             12

Displacements, Velocity and acceleration, their relationship – Relative motion – Curvilinear motion – Newton’s law – Work Energy Equation of particles – Impulse and Momentum – Impact of elastic bodies.

UNIT V            FRICTION AND ELEMENTS OF RIGID BODY DYNAMICS             12

Frictional force – Laws of Coloumb friction – simple contact friction – Rolling resistance – Belt friction.

Translation and Rotation of Rigid Bodies – Velocity and acceleration – General Plane motion.

   

      TOTAL: 60 PERIODS

TEXT BOOK:

1.      Beer, F.P and Johnson Jr. E.R. “Vector Mechanics for Engineers”, Vol. 1 Statics and Vol. 2 Dynamics, McGraw-Hill International Edition, (2007).

REFERENCES: 

1. Rajasekaran, S, Sankarasubramanian, G., “Fundamentals of Engineering Mechanics”, Vikas Publishing House Pvt. Ltd., (2000).
2. Hibbeller, R.C., “Engineering Mechanics”, Vol. 1 Statics, Vol. 2 Dynamics, Pearson Education Asia Pvt. Ltd., (2000).  
3. Palanichamy, M.S., Nagam, S., “Engineering Mechanics – Statics & Dynamics”, Tata McGraw-Hill, (2001).
4. Irving H. Shames, “Engineering Mechanics – Statics and Dynamics”, IV Edition – Pearson Education Asia Pvt. Ltd., (2003).
5. Ashok Gupta, “Interactive Engineering Mechanics – Statics – A Virtual Tutor (CDROM)”, Pearson Education Asia Pvt., Ltd., (2002).

         

 

5. b      EE25                               CIRCUIT THEORY                                 3   1   0  100

(Common to EEE, EIE and ICE Branches)

UNIT  I            BASIC CIRCUITS ANALYSIS                                                           12 

Ohm’s Law – Kirchoffs laws – DC and AC Circuits – Resistors in series and parallel circuits – Mesh current and node voltage method of analysis for D.C and A.C. circuits.

UNIT II            NETWORK REDUCTION AND NETWORK THEOREMS FOR DC AND AC     CIRCUITS:                                                                      12

Network reduction: voltage and current division, source transformation – star delta conversion.

Thevenins and Novton & Theorem – Superposition Theorem – Maximum power transfer theorem – Reciprocity Theorem.                                                        

                                                                                                                                    

UNIT III           RESONANCE AND COUPLED CIRCUITS                                      12

Series and paralled resonance – their frequency response – Quality factor and Bandwidth - Self and mutual inductance – Coefficient of coupling – Tuned circuits – Single tuned circuits.                                                                                                   

  

UNIT IV           TRANSIENT RESPONSE FOR DC CIRCUITS                                12

Transient response of RL, RC and RLC Circuits using Laplace transform for DC input and A.C. with sinusoidal input.

               

UNIT V            ANALYSING THREE PHASE CIRCUITS                                         12

Three phase balanced / unbalanced voltage sources – analysis of three phase 3-wire and 4-wire circuits with star and delta connected loads, balanced & un balanced – phasor diagram of voltages and currents – power and power factor measurements in three phase circuits. 

TOTAL :60 PERIODS

TEXT BOOKS:

1. William H. Hayt Jr, Jack E. Kemmerly and Steven M. Durbin, “Engineering Circuits Analysis”,Tata McGraw Hill publishers, 6^th edition, New Delhi, (2002).
2. Sudhakar A and Shyam Mohan SP, “Circuits and Network Analysis and Synthesis”,Tata McGraw Hill, (2007).

REFERENCES:

1. Paranjothi SR, “Electric Circuits Analysis,” New Age International Ltd., New Delhi, (1996).
2. Joseph A. Edminister, Mahmood Nahri, “Electric circuits”, Schaum’s series, Tata McGraw-Hill, New Delhi (2001). 
3. Chakrabati A, “Circuits Theory (Analysis and synthesis), Dhanpath Rai & Sons, New Delhi, (1999).
4. Charles K. Alexander, Mathew N.O. Sadik, “Fundamentals of Electric Circuits”, Second Edition, McGraw Hill, (2003). 

5. c      EC25           ELECTRIC CIRCUITS AND ELECTRON DEVICES     3  1  0  100

        (For ECE, CSE, IT and Biomedical Engg. Branches)

UNIT I             CIRCUIT ANALYSIS TECHNIQUES                                                 12

Kirchoff’s current and voltage laws –  series and parallel connection of independent sources – R, L and C – Network Theorems – Thevenin, Superposition, Norton, Maximum power transfer and duality – Star-delta conversion. 

UNIT II            TRANSIENT RESONANCE IN RLC CIRCUITS                                12

Basic RL, RC and RLC circuits and their responses to pulse and sinusoidal inputs – frequency response – Parallel and series resonances – Q factor – single tuned and double tuned circuits. 

UNIT III           SEMICONDUCTOR DIODES                                                            12

Review of intrinsic & extrinsic semiconductors – Theory of PN junction diode – Energy band structure – current equation – space charge and diffusion capacitances – effect of temperature and breakdown mechanism – Zener diode and its characteristics.

UNIT IV           TRANSISTORS                                                                                   12

Principle of operation of PNP and NPN transistors – study of CE, CB and CC configurations and comparison of their characteristics – Breakdown in transistors – operation and comparison of N-Channel and P-Channel JFET – drain current equation – MOSFET – Enhancement and depletion types – structure and operation – comparison of BJT with MOSFET – thermal effect on MOSFET. 

UNIT V            SPECIAL SEMICONDUCTOR DEVICES 

(Qualitative Treatment only)                                                 12

Tunnel diodes – PIN diode, varactor diode – SCR characteristics and two transistor equivalent model – UJT – Diac and Triac – Laser, CCD, Photodiode, Phototransistor, Photoconductive and Photovoltaic cells – LED, LCD. 

 

TOTAL : 60 PERIODS

 

TEXT BOOKS: 

1. Joseph A. Edminister, Mahmood, Nahri, “Electric Circuits” –  Shaum series,Tata McGraw Hill, (2001)
2. S. Salivahanan, N. Suresh kumar and A. Vallavanraj, “Electronic Devices and Circuits”,Tata McGraw Hill, 2^nd Edition, (2008). 
3. David A. Bell, “Electronic Devices and Circuits”, Oxford University Press,  5^th Edition, (2008). 

 REFERENCES: 

1. Robert T. Paynter, “Introducing Electronics Devices and Circuits”, Pearson Education, 7^th Education, (2006).
2. William H. Hayt, J.V. Jack, E. Kemmebly and steven M. Durbin, “Engineering Circuit Analysis”,Tata McGraw Hill, 6^th Edition, 2002. 
3. J. Millman & Halkins, Satyebranta Jit, “Electronic Devices & Circuits”,Tata McGraw Hill, 2^nd Edition, 2008.

6. a    EE26        BASIC ELECTRICAL AND ELECTRONICS ENGINEERING    4 0 0 100

(Common to branches under Civil, Mechanical and Technology faculty)

UNIT  I      ELECTRICAL CIRCUITS & MEASURMENTS                                        12

Ohm’s Law – Kirchoff’s Laws – Steady State Solution of DC Circuits – Introduction to AC Circuits – Waveforms and RMS Value – Power and Power factor – Single Phase and Three Phase Balanced Circuits.

Operating Principles of Moving Coil and Moving Iron Instruments (Ammeters and Voltmeters), Dynamometer type Watt meters and Energy meters.

UNIT  II    ELECTRICAL MECHANICS                                                                     12

Construction, Principle of Operation, Basic Equations and Applications of DC Generators, DC Motors, Single Phase Transformer, single phase induction Motor.

UNIT  III   SEMICONDUCTOR DEVICES AND APPLICATIONS                             12

Characteristics of PN Junction Diode – Zener Effect – Zener Diode and its Characteristics – Half wave and Full wave Rectifiers – Voltage Regulation.

Bipolar Junction Transistor – CB, CE, CC Configurations and Characteristics – Elementary Treatment of Small Signal Amplifier.  

UNIT  IV   DIGITAL ELECTRONICS                                                                                     12 

Binary Number System – Logic Gates – Boolean Algebra – Half and Full Adders – Flip-Flops – Registers and Counters – A/D and D/A Conversion (single concepts)                

UNIT  V    FUNDAMENTALS OF COMMUNICATION ENGINEERING                    12

Types of Signals: Analog and Digital Signals – Modulation and Demodulation: Principles of Amplitude and Frequency Modulations.

Communication Systems: Radio, TV, Fax, Microwave, Satellite and Optical Fibre (Block Diagram Approach only).

         TOTAL : 60 PERIODS

TEXT BOOKS:

1.    V.N. Mittle “Basic Electrical Engineering”,Tata McGraw Hill Edition, New Delhi, 1990.

2.    R.S. Sedha, “Applied Electronics” S. Chand & Co., 2006.

REFERENCES:

1. Muthusubramanian R, Salivahanan S and Muraleedharan K A, “Basic Electrical, Electronics and Computer Engineering”,Tata McGraw Hill, Second Edition, (2006).
2. Nagsarkar T K and Sukhija M S, “Basics of Electrical Engineering”, Oxford press (2005).
3. Mehta V K, “Principles of Electronics”, S.Chand & Company Ltd, (1994).
4. Mahmood Nahvi and Joseph A. Edminister, “Electric Circuits”, Schaum’ Outline Series, McGraw Hill, (2002).
5. Premkumar N, “Basic Electrical Engineering”, Anuradha Publishers, (2003).

6. b       ME26             BASIC CIVIL & MECHANICAL ENGINEERING   4   0   0   100

          (Common to branches under Electrical and I & C Faculty)

 

      A – CIVIL ENGINEERING      

              

UNIT  I  SURVEYING AND CIVIL ENGINEERING MATERIALS                              15

Surveying: Objects – types – classification – principles – measurements of distances – angles – leveling – determination of areas – illustrative examples.

Civil Engineering Materials: Bricks – stones – sand – cement – concrete – steel sections.

UNIT II      BUILDING COMPONENTS AND STRUCTURES                                   15

Foundations: Types, Bearing capacity – Requirement of good foundations.

Superstructure: Brick masonry – stone masonry – beams – columns – lintels – roofing – flooring – plastering – Mechanics – Internal and external forces – stress – strain – elasticity – Types of Bridges and Dams – Basics of Interior Design and Landscaping.

TOTAL : 30 PERIODS  

B – MECHANICAL ENGINEERING

 UNIT  III       POWER PLANT ENGINEERING                                                         10

Introduction, Classification of Power Plants – Working principle of steam, Gas, Diesel, Hydro-electric and Nuclear Power plants – Merits and Demerits – Pumps and turbines – working principle of Reciprocating pumps (single acting and double acting) – Centrifugal Pump.

UNIT IV      I C ENGINES                                                                                            10

Internal combustion engines as automobile power plant – Working principle of Petrol and Diesel Engines – Four stroke and two stroke cycles – Comparison of four stroke and two stroke engines – Boiler as a power plant.

UNIT V    REFRIGERATION AND AIR CONDITIONING SYSTEM                      10

Terminology of Refrigeration and Air Conditioning. Principle of vapour compression and absorption system – Layout of typical domestic refrigerator – Window and Split type room Air conditioner.

           TOTAL:  30 PERIODS 

REFERENCES:

1.    Shanmugam G and Palanichamy M S, “Basic Civil and Mechanical Engineering”,Tata McGraw Hill Publishing Co., New Delhi, (1996).

2.    Ramamrutham. S, “Basic Civil Engineering”, Dhanpat Rai Publishing Co. (P) Ltd. (1999).

3.    Seetharaman S. “Basic Civil Engineering”, Anuradha Agencies, (2005).

4.    Venugopal K and Prahu Raja V, “Basic Mechanical Engineering”, Anuradha Publishers, Kumbakonam, (2000).

5.    Shantha Kumar S R J., “Basic Mechanical Engineering”, Hi-tech Publications, Mayiladuthurai, (2000). 

    7. GE27             COMPUTER PRACTICE LABORATORY – II           0  1  2 100

LIST OF EXPERIMENTS

 

1. UNIX COMMANDS                                                                                               15

Study of Unix OS - Basic Shell Commands -  Unix Editor 

2. SHELL PROGRAMMING                                                                                     15 

Simple Shell program - Conditional Statements - Testing and Loops 

3. C PROGRAMMING ON UNIX                                                                              15

Dynamic Storage Allocation-Pointers-Functions-File Handling 

TOTAL : 45 PERIODS

HARDWARE / SOFTWARE REQUIREMENTS FOR A BATCH OF 30 STUDENTS

Hardware 

         1 UNIX Clone Server 

         33 Nodes (thin client or PCs) 

         Printer – 3 Nos.

Software 

         OS – UNIX Clone (33 user license or License free Linux) 

         Compiler - C 

8.         GS28                           PHYSICS LABORATORY – II                0   0    3   100 

LIST OF EXPERIMENTS

        1. Determination of Young’s modulus of the material – non uniform bending.

        2. Determination of Band Gap of a semiconductor material.

        3. Determination of specific resistance of a given coil of wire – Carey Foster     Bridge.

        4. Determination of viscosity of liquid – Poiseuille’s method.

        5. Spectrometer dispersive power of a prism.

        6. Determination of Young’s modulus of the material – uniform bending.

        7. Torsional pendulum – Determination of rigidity modulus.

                   • A minimum of FIVE experiments shall be offered. 

                   • Laboratory classes on alternate weeks for Physics and Chemistry.

                   • The lab examinations will be held only in the second semester. 

                                                CHEMISTRY  LABORATORY – II                 

         LIST OF EXPERIMENTS

        1. Conduct metric titration (Simple acid base)  

        2. Conduct metric titration (Mixture of weak and strong acids) 

        3. Conduct metric titration using BaCl₂ vs Na₂ SO₄ 

        4. Potentiometric Titration (Fe²⁺ / KMnO₄  or  K₂Cr₂O₇)

        5. PH titration (acid & base)  

        6. Determination of water of crystallization of a crystalline salt (Copper     sulphate)

        7. Estimation of Ferric iron by spectrophotometry.

                   • A minimum of FIVE experiments shall be offered. 

                   • Laboratory classes on alternate weeks for Physics and Chemistry.

                   • The lab examinations will be held only in the second semester. 

9. a      ME29      COMPUTER AIDED ENGINEERING DRAWING LABORATORY  

  0 1 2 100

List of Exercises using software capable of Drafting and Modeling

1. Study of capabilities of software for Drafting and Modeling – Coordinate systems (absolute, relative, polar, etc.) – Creation of simple figures like polygon and general multi-line figures.

2. Drawing of a Title Block with necessary text and projection symbol.

3. Drawing of curves like parabola, spiral, involute using Bspline or cubic spline.

4. Drawing of front view and top view of simple solids like prism, pyramid, cylinder, cone, etc, and dimensioning.

5. Drawing front view, top view and side view of objects from the given pictorial views (eg. V-block, Base of a mixie, Simple stool, Objects with hole and curves).

6. Drawing of a plan of residential building ( Two bed rooms, kitchen, hall, etc.)

7. Drawing of a simple steel truss.

8. Drawing sectional views of prism, pyramid, cylinder, cone, etc,

9. Drawing isometric projection of simple objects.

10. Creation of 3-D models of simple objects and obtaining 2-D multi-view drawings from 3-D model.

Note: Plotting of drawings must be made for each exercise and attached to the records written by students.

List of Equipments for a batch of 30 students:

        1. Pentium IV computer or better hardware, with suitable graphics facility  -30 No.

        2. Licensed software for Drafting and Modeling.  – 30 Licenses

        3. Laser Printer or Plotter to print / plot drawings – 2 No.

9. b                  EE29               ELECTRICAL CIRCUIT LABORATORY     0  0  3  100

                                                    (Common to EEE, EIE and ICE)

LIST OF EXPERIMENTS

        1. Verification of ohm’s laws and kirchoff’s laws.

        2. Verification of Thevemin’s and Norton’s Theorem

        3. Verification of superposition Theorem

        4. Verification of maximum power transfer theorem.

        5. Verification of reciprocity theorem 

        6. Measurement of self inductance of a coil 

        7. Verification of mesh and nodal analysis. 

        8. Transient response of RL and RC circuits for DC input.  

        9. Frequency response of series and parallel resonance circuits.

        10. Frequency response of single tuned coupled circuits.

TOTAL: 45 PERIODS

9. c             EC29        CIRCUITS AND DEVICES LABORATORY     0  0   3  100 

 

        1. Verification of KVL and KCL 

        2. Verification of Thevenin and Norton Theorems. 

        3. Verification of superposition Theorem.

        4. Verification of Maximum power transfer and reciprocity theorems. 

        5. Frequency response of series and parallel resonance circuits.

        6. Characteristics of PN and Zener diode

        7. Characteristics of CE configuration

        8. Characteristics of CB configuration

        9. Characteristics of UJT and SCR

        10. Characteristics of JFET and MOSFET

        11. Characteristics of Diac and Triac.

        12. Characteristics of Photodiode and Phototransistor.

TOTAL : 45 PERIODS 

10.       HS210              ENGLISH LANGUAGE SKILL LABORATORY         0    0   3   100   

                                                (Skill of Listening)

UNIT I (Micro Skills I)                                                                                             (4 hrs)

Tasks (Type I):  Lexical word identification

A)    Identifying the homophones/words with silent letters/often mispronounced words

B)    Identifying the missing words in native speech (Native accent)

Tasks (Type II):  Decompressing structures

A)     Expanding sound units into word clusters (Ex:  verbs with multiple auxiliaries/contracted forms

B)    Identifying the constituent words in collocations/compound words/idiomatic  phrases

UNIT I (Micro Skills II):  Identifying tonal variations for meaning making       (6 hrs)

Tasks:

A)    Punctuating the script after listening to it

B)    Marking word chunks/tone groups in transcript after listening to it

C)    Marking syllable stress in words

D)    Identifying tonal variations expressing rhetorical questions/ information seeking questions/exclamations/general statements

UNIT III (Content Comprehension and Making Inferences)                               (12 hrs)

Tasks:

A)     Listening and filling in the chart

B)    Multiple choice questions (negative/factual)

C)    True/False questions

D)    Questions with multiple answers(choosing two/three correct answers)

E)     Matching information

F)     Filling the blanks(not more than three words)

G)    Comprehending the text organization

UNIT IV (Listening and act)                                                                                    (8 hrs)

Tasks:

a.       Locating spots in a map following the given directions

b.      Transferring data to graphs/diagrams/flow charts

c.       Diagram/Picture completing tasks

d.      Finding the answer through the process of elimination

5.         MR 24        MARINE ENGINEERING THERMODYNAMICS     3  1  0  100

AIM

To impart knowledge to the students about Marine Engineering Thermodynamics.

OBJECTIVES

At the end of the study of this topic the students should have the knowledge on basic Thermodynamics and solve the problems on First and Second Law of Thermodynamics and Gas power cycles. Also should have the knowledge on fuel used in IC Engines and Combustion of Fuels.

UNIT I  BASIC CONCEPTS AND FIRST LAW OF THERMODYNAMICS                      12

Thermodynamic systems, concepts of continuum, thermodynamic properties, equilibrium, processes, cycle, work, heat, temperature, Zeroth law of thermodynamics. First law of thermodynamics – applications to closed and open systems, internal energy, specific heats, enthalpy,. – applications to steady and unsteady flow conditions.

UNIT II BASIC CONCEPTS OF SECOND LAW OF THERMODYNAMICS        12

Thermodynamic systems,  Second law of thermodynamics Statements, Reversibility, causes of irreversibility, Carnot cycle, reversed Carnot cycle, heat engines, refrigerators, and heat pumps. Clausius inequality, entropy, principles of increase in entropy, Carnot theorem, available energy, availability.

UNIT III FLUID CYCLES                                                                                           12

Thermo dynamic properties of pure substances, property diagram, PVT surface of water and other substances, calculation of properties, first law and second law analysis using tables and charts,

UNIT IV  GAS POWER CYCLES                                                                             12

properties of ideal and real gases, equation of state, gas laws.  Gas power cycles – Carnot, Otto, Diesel, Dual, Brayton, Ericsson, Sterling, Lenoir, Atkinson Cycles.

UNIT V  THERMODYNAMIC RELATIONS AND COMBUSTION OF FUELS          12

Exact differentials, T-D diagrams, Maxwell relations, Clasius Claperon Equations, Joule-Thomson coefficients. Heat value of fuels, Combustion equations, Theoretical and excess air, Air fuel ratio and Exhaust gas analysis

                                                                                                TOTAL : 60 PERIODS

TEXT BOOKS

1.     Nag, P.K., “Engineering Thermodynamics”, 1^st Edition, Tata McGraw-Hill Publishing Company Limited New Delhi, 1993.

2.     Russel,  “Engineering Thermodynamics”, 1^st Edition,  Oxford University Press, 2007

REFERENCES

1.     Holmann, “Thermodynamics”, 4^th Edition, McGraw-Hill Book Company,New York,1888.

2.     Rao, Y.V.C., “Thermodynamics”,4^th Edition,Wiley Eastern Ltd.,New Delhi,1993.

10.                   MR 211           WORKSHOP FITTING                             0   0  3    100

AIM:

  To impart knowledge on the Fitting methods of Metal joining Process

OBJECTIVES:

        On Completion of the Course The Students are expected to have the Knowledge  of  Metal  Cutting and Joining  Process  Tools and equipments used in Smithy, Carpentry, Fitting, Foundry, Welding and Sheet Metal.

 LIST OF EXPERIMENTS 

SHEET METAL

      Fabrication of tray, cone etc. with sheet metal. 

WELDING

      Arc Welding of butt joint, Lap joint, Tee fillet etc. Demonstration of gas welding. 

FITTING

      Practice in chipping, filing, drilling – Making Vee, square and dove tail joints. 

                                                                                                                                             TOTAL:  90 PERIODS

REFERENCES

1.    V.S.Venkatachalapathy, First Year Engineering Workshop Practice, Raamalinga Publications, Madurai, 1999.

2. P.Kannaiah and K.C.Narayana, Manual on Workshop Practice, Scitech      

    Publications, Chennai, 1999.